Low Voltage - Movement Blocked
Voltage too low. Check shore power connection.
Check Your Power Connection
Your lift's power is too low to operate safely. The system needs at least 23V to run.
Why Won't It Move?
Low power can damage your lift motor and cause it to stop unexpectedly. The system blocks movement to protect your equipment.
Quick Fix - Check These
1
Is shore power connected?
- • Check the power cord at the dock
- • Make sure it's plugged in securely
2
Is the circuit breaker ON?
- • Find your breaker panel
- • Look for the lift breaker
- • Flip it ON if it's tripped
3
Try again
- • Once power is restored, try moving the lift
- • Should work normally
Still Showing Low Voltage?
You may need:
- •Power supply replacement
- •Wiring inspection
- •Connection repairs
Contact your dealer for service.
Safety Note
Don't try to force the lift to operate - this protection keeps your equipment safe!
Was this article helpful?
Your feedback helps us improve our support resources