Guided Wi-Fi setup
Wi-Fi Setup
Use Atlantis Boater to connect a supported controller to Wi-Fi or update its saved network.
Prepare
Before you start
- Stand near the controller with Atlantis Boater open and signed in.
- Have your Wi-Fi network name and password available.
- Keep the lift stopped and make sure no one is near the boat or moving equipment.
- If the lift does not appear in the app, contact your dealer or Atlantis Support.
Physical setup control
Find the button with the Atlantis Boater symbol
Stop the lift and keep everyone clear. Only when Atlantis Boater reports a BLE setup lockout, hold this button and watch the separate wireless-status light. Release as soon as it flashes magenta once—about five seconds. This clears only the five-strike BLE setup lockout. It does not open a setup or re-provision window, unclaim the controller, or let another account claim it.
One magenta blink
Release now. The BLE setup lockout is cleared. No setup or re-provision window opens, and the current account keeps ownership.
Two magenta blinks
You have held too long. Release immediately; this is a warning only.
Five long magenta blinks
The 30-second APP factory reset occurred. Local app ownership and Bluetooth authorization were cleared, so the controller is available to claim with a new account. Saved Wi-Fi was not erased.
Connect
Connect with Atlantis Boater
- 01
Open Atlantis Boater
Sign in to the Atlantis Boater app and keep your phone near the lift controller.
- 02
Start the guided setup
Open the device or network setup shown in the app and follow each on-screen instruction.
- 03
Clear a reported BLE setup lockout only
Only if Atlantis Boater reports a BLE setup lockout, hold the physical button marked with the Atlantis Boater symbol and release as soon as the wireless light flashes magenta once—about five seconds. This does not open setup or release ownership. Never continue holding.
- 04
Choose Wi-Fi
Choose your Wi-Fi network and enter the network password when the app asks for it.
- 05
Complete setup
Keep your phone nearby and leave the app open while it finishes the connection.
- 06
Confirm the connection
Check that the lift appears connected in Atlantis Boater. If setup does not finish, record the app message and contact your dealer or Atlantis Support.
Setup did not finish
Stop and get help
Do not repeat the APP hold, continue past the first magenta blink, or change installer settings. Record the app message and any visible light color or rhythm, then contact your dealer or Atlantis Support.
Verify
Wireless light quick reference
- White breathing
- Unclaimed and ready to set up; no Wi-Fi credentials saved
- Cyan breathing
- Connected to your account, Bluetooth-only (Wi-Fi not set up)
- Yellow breathing
- Credentials are saved, but Wi-Fi is not connected
- Blue fast blink
- Scanning for Wi-Fi networks
- Blue breathing
- Connecting or provisioning
- Purple triple flash
- New Wi-Fi credentials were saved
- Cyan flash
- Network time synchronized
- Solid green
- Connected with a strong signal
- Green breathing
- Connected with a weak signal
- Orange slow blink
- The connection is unstable
- Red double blink
- The connection attempt did not finish
- Red slow blink
- Disconnected
- Magenta ×1
- BLE setup lockout cleared; release the button
- Magenta ×2
- APP hold warning; release immediately
- Five long magenta flashes
- APP factory reset occurred; the controller is claimable again
Was this article helpful?
Your feedback helps us improve our support resources